2
MOD-KOZE-50 - mounting instructions
a) Adjusting the items 1.2 in the RAM-KOZE-50 profile
www.KlusDesign.eu
Slide the items
(1.2)
along the
item
(1.1)
.
The minimum distance of the last
item
(1.2)
from the end of the
profile is 100 mm / 3.94".
The distance between items
(1.2)
cannot exceed 400 mm / 15.7”.
After sliding items
(1.2)
, make
sure that the power supply
(6)
now fits into the enlarged
opening.
Put the springs
(1.3)
back in the
items
(1.2)
.
To assist, use the mounting tool
for springs 1.3
(12)
.
If the power supply
(6)
does not
fit into the openings of the
RAM-KOZE-50 profile,
its items
(1.2)
must be slid
further apart accordingly.
To do this, remove the springs
(1.3)
.
This can also be done after
finishing the wet work.
Ia
IIIa
IIa
1.3
1.2
1.2
1.1
1.1
6.
min.
100 mm / 3
.94”
1.3
1.2
1.3
1.3
1.2
max.
400 mm / 1
5.7”
12
1.3
6.