KLUBB K38P, User Manual

Page: 16 / 64

16
Caution: Always observe safety instructions given on these plates. Any failure to comply with
these instructions could lead to serious injuries, or even death, or in any case a danger to exposed
operators and/or people. Always check that the plates are properly applied and legible. If not,
apply them or replace them.
D. General safety prescriptions and provisions
Respecting safety instructions and using safety devices properly enables operators to work
productively and safely, not only for themselves but also for others.
Check the trouble-free operation of the installations and protection and safety equipment.
Immediately report any malfunction to the person in charge in order to be able to perform the
servicing needed to reestablish original safety and reliability conditions.
It is prohibited to deactivate or modify any type of safety or protection equipment In such
cases, the warranty is voided and the company is relieved of any liability.
Danger: It is absolutely prohibited to disconnect any of the machine safety devices.
Danger: It is absolutely prohibited to use the machine when the safety devices are not activated.
According to the standards providing protection against accidents, when he is on the platform,
the operator must:
- wear a helmet
- wear and attach the safety harness to the fixed ring in the bucket
- The operator on the ground must also wear a helmet.
Also wear suitable protective clothes of an approved type (nonskid safety shoes, vest with
reflecting stripes …). Further, the operators must not wear rings, watches, jewels, open or loose
fitting clothes such as ties, torn clothing, scarves, unbuttoned jackets or unzipped shirts which
could catch on the moving gears.
Always keep the operator compartment, the surfaces, the steps of the stairs, the handrails and
the large supporting handles clean and free without there being any objects or marks left by oil,
mud or snow, to minimize any risks of sliding or tripping.
Always use stepladders, ladders, handles and dedicated handrails and never use the controls
and the flexible pipes as supports.
Clean the soles of your shoes before entering the MEPP.
Make sure that all the shelters and protections are correctly placed and that all the safety devices
are in place and operate efficiently.
Before use, it is essential to check the performance of the machine and its components. The
MEPP must be cared for and be in perfect condition according to the servicing program. Report
any operational irregularities to the servicing operators.
Many parts of the machines are made of special highly elastic steel: never weld the machine
without first obtaining the written authorization and instructions from
KLUBB .
www. duma -rent.com