KLS Martin maXium smart C, Instructions For Use Manual

Page: 59 / 128

Instructions for Use
maxium® smart C Electrosurgery Unit with maxium® smart Beam
Revision 1 59
10.5.3 Saving modified programs
Changes made to a program can be made permanent.
• Press Save .
• Confirm by tapping the check mark or the Return
button
or:
•
Press the symbol to open the Setup
•
Press Program settings
•
Press Overwrite program
•
Confirm by tapping the check mark or Overwrite
program
The base program and programs with the “padlock”
icon can be neither deleted nor overwritten. Changes
can only be saved under a different program name,
see section 10.5.4 “Saving a program under a new
name”, page 59.
10.5.4 Saving a program under a new name
If a setting is to be saved as an independent program,
this setting must be given a new name.
•
Press Save .
•
Enter the new name
•
Confirm by tapping the check mark or the Return
button
or:
• Press the symbol to open the Setup
• Press Programming settings
•
Press
Save as
• Enter the new name
• Confirm by tapping the check mark or Return