KlipXtreme KPM-410B, Installation Manual

Page: 12 / 40

Step 3
Verify that the mounting legs are all adjusted at the same level. Otherwise, if the height of mount
legs do not match or if the projector plate is not level, go to step 2 on page 9.
Verify that the supplied sliding M6 square nut in the mount leg is properly aligned with the slot on
the Projector Plate.
Step 2
Identify the projector’s approximate front-to-back center of gravity. Place your hands on each side
of the projector and gently lift it an inch from the surface on which it is resting. Carefully adjust
your grip on the projector until it seems balanced from front-to-back.
Make a mental note of center of gravity.
Identify the projector’s approximate side-to-side center of gravity. Place your hands on the front
and back of the projector and gently lift it an inch from the surface on which it is resting. Carefully
adjust your grip on the projector until it seems balanced from side-to-side. Make a mental note
of center of gravity. Place the Projector Assembly on top of the mounting legs with the center as
close as possible to the projector’s center of gravity.
Step 2 Step 3
Side-to-side
Center of gravity
Front-to-Back
Center of gravity