6
5
Maximum (MAX) Minimum (MIN) Function
The MAX/ MIN mode allows the user to view only the lowest (MIN)
or highest (MAX) readings.
Press the MAX/ MIN button once and “MAX” appears on the display.
The LCD is now displaying the maximum reading of the selected
parameter in the display. The display will not change until a higher
reading is registered.
Press the MAX/ MIN button again and “MIN” appears on the display.
The LCD is now displaying the minimum reading of the selected
parameter in the display. The display will not change until a lower
reading is registered.
Press the MIN/MAX button for 3 seconds to exit the MIN/MAX
mode, and the “MAX” or “MIN” icon will disappear.
Auto Power OFF
Meter automatically shuts down after approx. 30 minutes of inactivity (Sleep
Mode). To override Auto Power Off function (Non-Sleep Mode), firstly press
the MAX/MIN button and hold, then press power button, after the display
appears, release both buttons. Icon “
” will not shown on the LCD. The
unit will not auto power off now.
Replacing the battery
It is neccessary to replace the battery when the battery symbol
appears. Open the battery case on the rear side. Insert a new
alcaline battery. Connect the battery with the correct polarity with
the battery-clip. In order to avoid leaking batteries replace weak
batteries asap. In case of leaking batteries use gloves and goggles
for personal protection.
Technical information
Specifications
Function
Range & Resolution
Humidity
0.0 .. 100.0%RH
Temperature
-20.0 .. 60.0°C (-4°F .. 140°F)
Response Time:
<15 seconds
(90% of final value in moving air)
Polarity:
Automatic, (-) negative polarity indication.
Low battery
indication:
The “ ” is displayed when the battery
voltage drops below the operating level.
Operating
Conditions:
32 to 122°F (0 to 50°C);
< 80% RH non-condensing
Storage Conditions:
-40 to 185°F (-40 to 85o°C);
<99% RH non-condensing
Power:
One standard 9V, NEDA1604 or 6F22 battery.
Battery Life:
Approx. 48 hours
Dimensions/
Weight
146(L) x 54(W) x 34(H) mm;
138g (Including battery)
General provisions
Explanation of symbols
This sign certifies that the product meets the requirements of the EEC directi
-
ve and has been tested according to the specified test methods.
Disposal
Maintaining the unit
Clean it with a soft damp cloth. Do not use solvents or scouring agents.
This instrument is labelled in accordance with the EU Waste Electrical and Electronic
Equipment Directive (WEEE). Please do not dispose of this
instrument in household waste. The user is obligated to take end-of-life
devices to a designated collection point for the disposal of electrical and
electronic equipment, in order to ensure environmentally-compatible disposal.
This product has been manufactured using high-grade materials and components which can be
recycled and reused
Never dispose of empty batteries and rechargeable batteries in household waste. As a
consumer, you are legally required to take them to your retail store or to an appropriate
collection site depending on national or local regulations in order to protect the envi-
ronment. The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
Display:
Dual digital LCD display with backlight
Sensor Type:
A single chip relative humidity and temperature
multi sensor module comprising a calibrated
digital output
