The IC-650-T packs proven materials and
wide dispersion horn technology into an
installer-friendly, UL-2043 and 1480 certi-
fied loudspeaker with an integrated back
can and multi-tap transformer. IC-T Series
speakers have been included in a num-
ber of major installations nationally, from
Bloomingdale’s in New York City to the
Ron Jon Surf Shop in Orlando.
The two-way IC-650-T features a 6.5-inch
woofer, and 1-inch titanium diaphragm
compression driver on a 3.5-inch round
modified XT Tractrix
®
Horn for smooth
response with constant directivity. A
Tractrix port design helps to provide
deeper, fuller bass with less compression
and distortion. A new, more compact
design simplifies low ceiling mounting.
For distributed line applications, the
IC-650-T features a 70/100 volt multi-tap
transformer. A single rotary switch for the
4-ohm bypass and multi-tap setting is con-
veniently located under the speaker grille.
The IC-650-T is shipped complete with a
tile bridge for installation in a suspended
ceiling or wherever additional reinforce-
ment of the ceiling material is required.
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
In-Ceiling Loudspeaker
• Wider, shorter design to fit low ceilings; multi-tap transformer
• 70-volt, 100-volt, or 8-ohm operation selectable via front
baffle switch
• Tractrix
®
Port design for deep bass with less compression
• Wide dispersion Tractrix
®
Horn tweeter with XT technology for
clear sound in any location
• Designed to mix and match with Klipsch CA-T speakers
IC-650-T
Frequency response
50-20k Hz +/- 4 dB
Power handling
80 watts (18.8V) cont.
Sensitivity
90dB 2.83 V/1M
Nominal impedance
8 ohms, min 4.4 ohms when switch is
set to 8 ohm position
Transformer taps
70V: 60W, 30W, 15W, 7.5W
100V: 60W, 30W, 15W
Maximum acoustic output
106 dB @ 1M
Coverage Angle
105 degrees
Transducers
6.5” woofer and 1” titanium
diaphragm compression driver on a
3.5” round XT modified Tractrix Horn
Enclosure tuning
Vented via a Tractrix port
Input connections
Terminal Strip
Thru hole width
10” diameter
Overall width
10.75” diameter
Overall depth
10.938”
Mounting depth
10.625”
Cutout dimensions
10.125” diameter
Weight
11.25 lbs.
Finishes
Black and White
S p e c i f i c a t i o n S
