Hygeno
Instruction Manual
14/05/20 Rev: 1.0.0 (TRANSLATION FROM THE ORIGINAL LANGUAGE)
18
11. MACHINE PREPARATION AND COMMISSIONING
11.1. Machine start-up
NOTE: Before operating the machine, perform preliminary inspection.
Before starting up the machine, ensure the emergency on the back of the machine is not pressed.
11.2. Machine filling
Before leaving the machine unattended or performing any maintenance operation, ensure it is on a flat
surface, turn off the machine.
1.
The solution tank may be filled to maximum filling capacity (20 L), paying attention to the level
shown in the small gauge pipe located on the side of the tank
2.
It is advisable to fill the solution tank, and pour the filling water in the appropriate housing, fitted
with blue filter (dirt filter)
Leave a sufficient volume for the disinfectant.
To avoid damaging the tank, the water temperature must not exceed 50°C.
Measure the amount of chemical in the solution tank after filling it with water. Before adding not-liquid
chemicals into the tank of the solution, dissolve them completely.