Klinkmann Jazz MJ20-ET1, Quick Start Manual

Page: 2 / 2

02/13 MJ20-ET1
Wiring

Do not touch live wires.

Unused pins should not be connected. Ignoring this directive may damage the device.

Double-check all wiring before turning on the power supply
Ethernet Wiring—General

Use standard Ethernet shielded cable.
Earthing the MJ20-ET1
To maximize system performance, avoid electromagnetic interference as follows:

Connect the functional earth terminal ( ) directly to the earth ground of the system.
 Use the shortest, less than 1m (3.3 ft.) and thickest, 2.08mm
2
(14AWG) min, wires possible.
MJ20-ET1 Technical Specifications
Port type 10/100 Base-T (RJ45)
Cable type Shielded CAT5e cable,
up to 100m (328 ft)
Auto crossover Yes
Auto negotiation
Yes
Galvanic isolation Yes
Weight
15g (0.53 oz)
Environmental
Ingress protection
IP 20 , NEMA 1
Operational
temperature
0°C to 50°C (32°F to 122°F)
Storage
temperature
-20°C to 60°C (-4°F to 140°F)
Relative Humidity
(RH)
5% to 95% (non-condensing)
Київ
тел. +38 044 495 33 40
klinkmann@klinkmann.kiev.ua
Самара
тел. +7 846 273 95 85
samara@klinkmann.spb.ru
Москва
тел. +7 495 641 1616
moscow@klinkmann.spb.ru
Екатеринбург
тел. +7 343 287 19 19
yekaterinburg@klinkmann.spb.ru
Санкт-Петербург
тел. +7 812 327 3752
klinkmann@klinkmann.spb.ru
Rīga
tel. +371 6738 1617
klinkmann@klinkmann.lv
Helsinki
puh. +358 9 540 4940
automation@klinkmann.fi
Tallinn
tel. +372 668 4500
klinkmann.est@klinkmann.ee
Vilnius
tel. +370 5 215 1646
post@klinkmann.lt
Минск
тел. +375 17 2000 876
minsk@klinkmann.com
www.klinkmann.ru
mj20-et1-spec_en_1215