Page 12 of
15
Version 1.0
© KLING & FREITAG GMBH
User's Manual
VIDA M Adapter Plate
1.0
23.10.2020
10/23/2020
K&F
4.3.1
Simplified Mounting Using the Universal Joint
1. Perform steps 1 to 6 of the previ-
ous section.
2. Remove the thumbscrew at the
stand joint.
3. Fold the stand down.
4. Set up a support of about
310 mm height and place the
VIDA M on it front-side down.
Take careful not damage the
speaker with the support.
5. Fully slide the VIDA M with the
Universal Header HD attached
onto the stand.
310 mm
