User's manual
K&F NOMOS XLS
KLING & FREITAG GMBH © 2014
Version 1.2
Page 9 of 21
4.
Setup
4.1
Removing the Transport Covers
To remove the transport lid, turn the appropriate catches 180° to completely release the
latch.
Lift the lid from the speaker.
4.2
Stacked Setup
1.
Securely place the bottom subwoofer
onto a level surface.
2.
Stack the subwoofers on top of one
another. Make sure that the plastic glider
of subwoofers stacked on top of one
another are securely positioned in the
grooves of the lower speaker.
You can connect horizontally stacked
systems with the joint plates.
3.
Stacked systems must be stable even if
they are inclined by 15 degrees without
additional additional securing. If this
is not the case the systems have to be
secured against falling over in order to
guarantee the stability of the stack.
Example:
