KLING & FREITAG LINE 212-6 - SP, User Manual

Page: 4 / 44

User’s Manual LINE 212-6 - SP / LINE 212-9 - SP
KLING & FREITAG GMBH ©2003 - 2014 Version 5.1, 09.09.2014 Page 4 of 44
Contents
Chapter Page
1. General Safety Instructions 5
2. Introduction SP Loudspeakers 7
3. Connectors, Controls und Displays 9
4. Power Cord 13
5. Rigging Instructions for Line 212 Systems 14
5.1 Vertical Suspension 14
5.2 Horizontal Suspension 15
6. Using the ‘allsafe JUNGFALK’ Flying Points 16
7. Using the Rear Mounted ‘allsafe JUNGFALK’ Flying Track 17
7.1 Mounting the Single Stud Fittings 17
7.2 Mounting the Double Stud Fitting 18
8. Coverage Pattern of the Line 212 --- SP Systems 19
8.1 Changing the Coverage Pattern 19
9. Mounting Instructions for Speakers 20
9.1 Proper Arrangement of the Loudspeakers 20
9.2 Arrayed Speaker Systems (Cluster) 21
9.3 LINE 212 Systems on Top of SW 215E 22
10. Wiring 23
10.1 Avoiding Ground Loops 23
10.1.1 What is a Ground Loop? 23
10.1.2 Avoiding Ground Loops 23
10.2 Connecting the Power Connectors to the Connecting Terminal 24
11. Configurations and Connecting Diagrams 25
11.1 Operating the Systems without K&F System Controller 25
11.1.1 Full-Range Mode 25
11.1.2 Full Range Mode with Subwoofer 26
11.2 Operating the Systems with K&F System Controller 27
11.3 Maximum Configuration 27
12. Operating the Speakers 28
13. Touching Up Damage to Paint / Changing the Front Foam 28
14. Block Diagram LINE 212 - SP 29
15. Technical Specifications 30
15.1 LINE 212-6 - SP 30
15.2 LINE 212-9 - SP 32
16. Measuring Charts 33
16.1 LINE 212-6 - SP 33
16.2 LINE 212-9 - SP 35
17. Dimensions 37
18. Accessories for the LINE 212 System 38
19. Regulations for Disposal 39
19.1 Germany 39
19.2 EU, Norway, Iceland, and Liechtenstein 39
19.3 Other Countries 39
20. Declaration of Conformity and International Certificates 40
20.1 Declaration of Conformity 40
20.2 EMV Certificate Directive 89 / 336 / EWG 41
20.3 TÜV Certificatefor USA und Canada (UL 6500) 43
21. Included Instructions for Loudspeakers and Mounting Accessories