Data ultimo aggiornamento: 02/09/2015
Pag. 4 di 28
INSTRUCTIONS FOR GRINDING
THE PATENTED PLANETARIO KLINDEX has changed the way you grind and polish marble,
granite and any other stone floors. Now grinding is easier, faster and more economic. Furthermore, the
work is clean and noiseless.
The PLANETARIO is suitable for all kinds of single-brush machines.
BASIC INFORMATION:
BEFORE YOU START it is very important to take note
of some general information. THE HARDNESS OF FLOORS is always different according to the
different materials used when the floor was made. Taking these points into account it is important to note
the following issues:
a)
THE SOFTER THE FLOOR
, more power is necessary to run the diamond discs.
b)
THE HARDER THE FLOOR
, less power is necessary to run the diamond discs.
c)
THE HIGHER THE ROTATION
of the diamond disks, faster in the grinding, however, more power is
necessary to run the diamond disks.
IN ACCORDANCE WITH THESE CONCEPTS, the Company has developed THREE types of
Planetario:
PLANETARIO K 800: for soft stone floors and wood floors.
PLANETARIO K 1000: for medium hard floors, like standard marble.
PLANETARIO K2000: for very hard floors, like granite and gres.
WARNING ABOUT CORRECT USE OF ELECTRICITY
One of the problems most frequently found during use is the problem of electric current compatibility.
Working with a single-phase
machine with over 2hp might mean that the correct current will not arrive at
the machines. FOLLOW THESE SUGGESTIONS:
1)
Connect the machine to the nearest Circuit Breaker Box socket.
2)
If you need to use an extension cable, use only a cable that is twice the thickness of the cable from
the machine. Lengthening the cable too much or using an inadequate cable may not provide the
correct current and the start capacitor may burn.
3)
DO NOT CONNECT more than one machine with the same cable. The electricity may not be enough
for both.
ATTENTION
:
Assemblage of the block stirrup
It is recommended to shut well the block stirrup UT0730x to the planetary classic carcass before the use.
Periodically (every beginning job) check its blocking.
MAINTENANCE
:
It is recommended to grease periodically
OIL (GREASE)
NLGI Grade
2
Classification DIN51502
KP 2 P - 25
Timken Test useful load ASTM2509
50 (lbs)
Working temperature
-25 / +170 (°C)
Lubrificant / viscosity (40°C)
Mineral / 840 mm
2
/s
Thickener
Complex soap AL
Quantity
Satellite Ball-bearing
10 g for each greasing
Pronged (toothed) wheels
30 g for each greasing
Frequency
─
Carry out the first greasing after 50 hours of work
─
Subsequently, carry out every 100 hours of work
