Klimawent
– the warranty of highest quality at attractive price
19.03.2021
Grinding-Welding Station SLOT
3 of 4
Figure 1 Construction and dimensions of SLOT
Note:
Dimensions in the drawing above are in millimetres!
Table 2 Characteristic dimensions of SLOT
Type of SLOTs
Mass
[kg]
A
[mm]
D1
[mm]
SLOT 1600
57
800
200
SLOT 2000
75
1200
250
SLOT 3000
94
1600
315
SLOT 4000
113
2000
315
Table 3 Additional equipment – Replacement grates
Type of grates
Part no.
Description
R-1600
801R04
Thanks to the exchangeable grate, you can
effectively remove debris from manual plasma
cutting. The grate is mounted in place of the
standard grate.
R-2000
801R05
R-3000
801R06
R-4000
801R07
INSTALLATION AND COMMISSIONING
Grinding-Welding Station
SLOT
should be placed on an even and levelled surface, and then connected to an
extraction system with adequate capacity – see above – Table 1 Technical data of
SLOT
.
OPERATIONAL USE
The device requires no special treatment during operation. Usage boils down to cleaning the stand of
accumulated dirt on the grate surface and in the drawer and emptying the drawer of dust. Interferences in the
operation of the device and the procedure in such cases are described below – see Table 4.
