3
10.01.2019
Standing Extraction Arm
ERGO LUX-
{
M
;
K
;
L
;
D
}-
R
1.
Introductory Remarks
The purpose of the present
Use and Maintenance
Manual
is to supply the Purchaser and the
future User with directions within the range
of application
, installation, start-up and the opera-
tional use of the
ERGO LUX-R Extraction Arm
.
Therefore, installing, start up and operational use are exclusively admissible after get-
ting acquainted with the contents of the Use and Maintenance Manual
.
With regard to continuity of work carried on improvement of our products, we reserve for our-
selves
the revision possibility
of the
draft and technological changes improving
their
functional
features and safety.
The construction
of the
ERGO LUX-R Extraction Arm
meets
the requirements of the current
state of technology as well as the safety and health assurances included in:
2006/42/EC
Machinery
Directive
of the European Parliament and of
the Council
of 17 May
,
2006 on
machinery
– amending the 95/16/EC (recast)
/
Journal of Laws EC L157 of 09.06.2006, page 24
/
The device has been constructed and produced on the basis of following harmonized
standards:
EN ISO-12100:2012
–
“Safety of machinery –
Basic concepts, general
principles
for design. Risk assessment and risk reduction”.
2.
Application
ERGO LUX-R Extraction Arm has been developed for capturing the welding dust particles
and welding gas
and also other fine dust particles,
directly at the emission source, in order
to avoid the
contamination expanding
within the
process room /
hall and to
protect
the
people
in the vicinity from inhaling the contamination.
The extraction arms
are
manufactured in hanging and standing version. They can work inde-
pendently, in a single configuration
with one extraction fan, or in a group of extraction arms,
connected to the main collecting ductwork (with a central fan).
3.
Reservations of Producer
A
.
Producer is not responsible for failures arising during the use that is inconsistent to the
purpose of application.
B
.
Installing any additional elements
not belonging to the
normal device structure (or acces-
sory set) is not acceptable.
C
.
Any structural changes
or modification of the unit carried out by User on one’s own are
not permitted.
D
.
Protect the
flexible elements
and the
suction duct segment
(pipe)
from
mechanical dama-
ge.
E
.
Prior to installing examine the load capacity
of the of the wall or other building structure
in points where the device shall be mounted.
Unsure mounting
could cause hazard to personnel / people
in the vicinity
, as well as da-
mage of the device itself.
F
.
Do not use
the
device for conveying
the
air mixture with combustible substances,
in form of gas, vapour, mist or dust
– that might create explosive atmosphere.
