9
31.05.2019
RADIAL ROOF FANS
BULLET-N
The fan can be restarted after the control steps are carried out, as described in the Section 6
“Assembly and Start-up” in the present Use and Maintenance Manual.
Exclusion from this are activities that should be performed at the running fan, and with
strict observance of the rules of Occupational Health and Safety
– e.g. measuring of the
vibrations.
10.
Occupational Health and Safety
Start up and the operational use is only admissible exclusively after getting acquainted
with the contents of the present Use and Maintenance Manual
. The fan will not cause any
hazard to User / personnel, if it is stably installed on the roof base or another supporting struc-
ture of appropriate load carrying capacity.
Connect the fan to the power supply system, strictly according to the enclosed Connection Dia-
gram and the guidelines shown in Section 6 of the present
Use and Maintenance
Manual.
This
ought
to be carried out exclusively
by a qualified person,
and
in accordance
with the
valid regulations / rules of the Occupational Health and Safety
. During the operational use,
check the state of the PE protective cable.
Any technical revisions and activities connected with repair, have to be
executed, necessarily
after the device disconnection from the power supply system
(
isola
-
ting switch
).
11.
Transport and Storage
The fans are wrapped with foil and placed in cardboard packages. On the package surface are
indicated their weights. During the loading, re-loading and transport, the packages should not
be overturned, thrown. Do not put any load on the package. Stacking of packages is forbidden.
During the transport it is important to protect the devices from weather conditions and damage.
Storage area: dry rooms and areas of efficient ventilation.
12.
Terms of warranty
The period of warranty for the purchased device is indicated in the “Card of Warranty”. The war-
ranty does not comprise:
● mechanical damage and dysfunctions caused by User,
●
device failures caused
during
use which was in contradiction with the purpose of operational
use and the present Use and Maintenance Manual,
● any damages being effected during the improper transport, storage or incorrect maintenance.
Infringement of the Section 3 “Reservations of producer” of the User’s Manual and espe-
cially modifications
undertaken by User on one’s own or operational use that is in contra-
diction with its purpose shall cause the loss of warranty validity
.
