www.
klimaire.
com
BG
KUMR-903
SMART OPERATION MANUAL
Klimaire KUMR-903
Technical Parameters
Distance to A/C Unit
: 25 ft ( 8 m )
Power
: DC 4.5 V ( 3 AAA batteries, not included )
Battery Life
: Apx. 6 months
Dimensions WxHxD in (mm)
: 4 ⅜ x 1 ¾ x ⅞ ( 112 x 44 x 22 )
Weight
: 3 Oz ( 80 gr. )
KUMR-903
SMART INSTALLATION
The unit can be placed on a desk or table with its own
stand.
For wall-moun ng, please use the two small screws
provided in the package and install them at eye level with
2 ¾” (70mm) spacing between each moun ng hole.
Mount
KUMR-903
at a visible loca on that will
communicate
with the air-condi oning unit receiver with
no major
obstacles between the two. The unit is provided
with
mul -angle signal transmission.
No wiring will be required for this installa on.
TIMER ON Se ng
You can set the mer on only a er turning off your air-
condi oner.
·
Press the ‘
TIMER
’ bu on, the clock signal
‘ON’
appears
on the LCD and me-flashes.
·
Press
and
bu ons to adjust the me you want to
turn on the air-condi oner.
·
The indicated me will cease flashing a er 10 seconds.
The LCD will display the current me and mer signal
‘ON’
. Then the se ng is completed.
TIMER OFF Se ng
You can set the mer off only a er turning on your air-
condi oner.
·
Press the ‘
TIMER
’ bu on, the clock signal
‘OFF’
will appear
and me-flash on the LCD display.
·
Press
and
bu ons to adjust the me you want the
air-condi oner to turn off.
·
The displayed me will stop flashing a er 10 seconds. The
LCD will display the current me and mer signal
‘OFF’
.
This indicates the mer OFF se ng is finalized.
·
The me range you can set is 00 – 24 hours.
1) Press the ‘
TIMER
’ bu on twice in succession,
the mer ON/OFF function is now canceled.
2) Press the ‘
TIMER
’ bu on to check the me of
the mer on the LCD display.
3) A er the mer se ng finalizes, ensure the
remote is aiming at the air-condi oner and
within effec ve range, otherwise the se ng
would be invalid.
e-mail: [email protected]
KUMR-903 06/20
CLOCK Se ng
·
Press the ‘
CLOCK
’ bu on; the clock on the LCD will
flash.
·
Press the
and
bu ons to adjust the current me
·
Press the ‘
CLOCK
’ bu on again, the clock on the LCD
will stop flashing, indica ng the se ng is finished (if
you don’t press the ‘
CLOCK
’ bu on, it will be
finished automa cally a er 10 seconds).
NIGHT LIGHT Se ng
·
To turn on the night light, press the ‘
MODE
’ and
‘
ENTER
’ bu ons simultaneously.
You will see
displayed on the LCD. This indicates
the night light func on is on.
To turn off the night light, press the ‘
MODE
’ and
‘
ENTER
’ bu ons simultaneously.
The
will disappear from the LCD display.
·
The light will turn on when mo on is detected. It will
turn off in 15 seconds when you go to bed or leave
the room, making it convenient and energy-saving.
C / F Func on
·
Default se ng
: F (range 61 – 86F or 16 – 30C)
adjustable in 1-degree increments for either F or C.
·
Se ng method
: Press
TEMP+
and
TEMP-
simultaneously to convert C to F and vice versa.
www.klimaire.com