5
●
Hang the four mounting rods to the positions
marked as picture shown (using twelve nuts and
eight washers to support the suspension
brackets). Suspend the unit to the mounting rods.
Lock the nuts, ensure for good drainsage, and
check whether the unit is on horizontal level by
using leveling guage.
Lock Nut
Washers
Suspension
Bracket
CAUTION
: Overtightening the screws will distort the front panel.
CROSS SECTION OF AIR OUTLET
INDOOR UNIT INSTALLATION
●
Install the leveling metal plate to adjust the gap
between the unit and a ceiling, fixing the screws
following No.
in paper pattern.
●
Remove four screws (M8). Fix the front panel
with the units by tighten up four screws (M8).
1 2 3 and 4