7
Microprocessor is functioning
Both the temperature and the fan speed will be
automatically controlled by the microprocessor.
Both the indoor unit and the outdoor unit will stop
operating. In dehumidifying, the fan will stop
operating to eliminate the humidity. This opera-
tion is controlled by the microprocessor.
Automatic System:
When the Auto position of fan function
is chosen, the fan will automatically operate according to
the difference between the room temperature and the set
temperature. If the difference is great, the fan will run at
high speed. If the difference is small, the fan will run at the
low speed as shown in the diagram.
How to use the remote control to operate the unit
AUTOMATIC FAN SPEED CONTROL
Room Temperature
Set Temp.
Fan Speed
HI
MED
LOW
25
o
C
24
o
C
23
o
C
22
o
C
21
o
C
4. Heat Mode :
Press
MODE
button to select a
HEAT
position on the LCD display window, the
unit will operate according to the set temperature.
5. Auto Temperature Control Mode :
Press
MODE
button to select an Auto Changeover function,
then the unit will operate in either
Cool mode
or
Heat mode
automatically
depending upon the room temp and set temp. At this mode, sign "Cool" and
"Heat" will appear simuteneously on the display screen.
TEMP
TEMP
❏
BUTTON
Press button to select the desired temperature (The desired temperature can be adjusted
from 18
o
c to 30
o
c)
❏
FAN BUTTON
To adjust the fan speed of the air conditioner press
FAN
button to select the desired airflow volume.
●
When the
HIGH
sign illuminates, the fan is in the fastest speed mode.
●
When the
MED
sign illuminates, the fan is in the medium speed mode.
●
When the
LOW
sign illuminates, the fan is in the slow speed mode.
Leave it to the
microprocessor!
