KLIC-N-KUT KNK Force, User Manual

Page: 250 / 401

250

Perspective: This is where the fun begins. Combining this setting with another rotation provides the 3D
illusion. Here are examples:
9.15 3D Extrude (SCAL PRO only)
•
The 3D Extrude is used to create the illusion of a shape being pushed or thrust outward. To access this
function, select a shape and go to Effects>3D Extrude . In the following example, text will be used to show
the effects of the settings:

X Offset: Increasing X Offset will extend the extrusion to the right while decreasing it will retract the
extrusion towards the left. Note that Y Offset has been set to 0 and Depth is at the default of 0.5:

Y Offset: Increasing Y Offset will extend the extrusion downwards while decreasing it will retract the
extrusion towards the top. Note that X Offset has been set to 0 and Depth is at the default of 0.5:
Option to use
Perspective
Change X and/or Y Offset
Click OK
when done
Click here to manually
update the preview Check this box to have the
preview update with changes
Enter the thickness
of the
Perspective
Option to remove
overlap from extrusion
Change extrusion color
Option to make
extrusion an outline
only
X Offset = 0.25
Y Offset = 0
X Offset = -0.35
Y Offset = 0
X Offset = -0.25
Y Offset = 0
X Offset = 0.35
Y Offset = 0
X Offset = 0
Y Offset = 0.25
X Offset = 0
Y Offset = -0.25
X Offset = 0
Y Offset = 1.0
X Offset = 0
Y Offset = 0.35
X : 0 Y : -50 Z : 0
Perspective : 65
X : 0 Y : 50 Z : 0
Perspective : 65
X : 50 Y : 0 Z : 0
Perspective : 100
X : -26 Y : 26 Z : -20
Perspective : 100