KLEVER
INNOVATIONS
What Are You Cutting?
Our cutters are designed for multiple industries, multiple uses.
Visit
www.kleverinnovations.net
for videos of proper use and additional information.
CAUTION: Even though these are Safety products, please understand that blade edges are sharp.
Proudly made in the U.S.A.
(800) 218-3068
REDUCE CUT INJURIES
•
REDUCE DAMAGED GOODS
•
ALWAYS SAFETY READY
Straps / Banding
•
Align cutter opening with edge of strap or band.
•
Cut banding at a downward 45° angle.
Plastic / Film / Wrap
•
Align cutter opening with edge of material.
•
Pull cutter in a straight line with even force to
cut through material.
Tip:
Klever safety cutters are not designed to
cut metal banding.
Tip:
Start the cut from the bottom of the material and pull up
toward the top of the pallet. Keep material taut while cutting.
Mailing / Box Label
•
Align cutter tip with outer edge of label.
•
Press tip just beneath top layer of box.
•
Angle cutter about 45° to box.
•
Pull to cut around label.
•
Lift up on corner of cut and peel off.
Tip:
Repeating for all sides of label allows
for clean removal.
Packing Slip Envelope
•
Align cutter tip with top of envelope.
•
Apply downward pressure and pull the blade
through the stop sheet of plastic.
Tip:
Be careful not to press too deep. Avoid
contacting contents of envelope.
