USING YOUR GRILL
8
HEIGHT CONTROL FEATURE:
SWIVEL BEARINGS OF THE LID:
TEMPERATURE PROBE:
NOTE: You cannot open the lid of the QUICKTIME GOURMET GRILL™ with the height control clip in the
“LOCK” position. Before use, always slide the height control clip to the “OPEN” position first. Do not
attempt to open the lid violently.
NOTE: Some programs limit the range of possible core temperature values. If you wish to set another core
temperature, select another program or deactivate the current selected program.
NOTE: The temperature probe is inserted in an inner tray that can be removed from the storage tray. You
may place the inner tray beside the appliance and use it for laying the temperature probe aside. If the
temperature probe is not in use during grilling, you should leave the storage tray inserted in the control
panel. This way the probe connector is protected against pollution.
The lid of the
QUICKTIME GOURMET GRILL™ can be adjusted to accommodate the thickness of your food
using the height control feature. This way delicate and tender ingredients (e.g. fish, burger, or tomatoes) will not
be compressed, when lowering the lid for contact grilling. With the height control feature, the lid will be locked
in the selected distance to the lower grilling surface: from approx. 2cm (position 1) to up to 5.5cm (position 5).
Due to the swivel bearings of the lid, the lid can be adjusted parallel to the lower grilling surface, thus cooking
your food evenly.
The lid can be rotated within the lid support. For contact grilling, the lid can be adjusted to slightly touch the
food evenly on the complete grilling area. Therefore, those parts near the lid hinge are not squeezed, when
lowering the lid onto the food. The lid is not fixed in the swivel bearings and may turn freely. Especially, when
grilling cuts of tough meat (e.g. beef steaks, cutlet), the lid adjusts according to your food automatically.
The storage tray holding the temperature probe is located on the left side of the control panel. After pulling out
and removing the storage tray, the probe connector is accessible. Use the temperature probe for monitoring
the core temperature of your food.
Immediately after selecting the core temperature control via the probe button, you may set the desired core
temperature. When the set core temperature is reached, an acoustic signal is given.
The actual core temperature within your food is shown via a line of dashes in the upper half of the display area.
The dashes will flash and then illuminate continuously one by one while the actual core temperature is rising.
Each dash is assigned to a temperature value: 45°C (113°F), 50°C (122°F), 55°C (131°F), 60°C (140°F), 65°C
(149°F), 75°C (167°F). Each one of these core temperature values can be set as the desired core temperature.
45°C (113°F) 50°C (122°F) 55°C (131°F) 60°C (140°F) 65°C (149°F) 75°C (167°F)
Summary of Contents for QUICKTIME GOURMET GRILL
Page 2: ......
