Kleton PF705, User Manual, Page: 2 / 6

2. Pull the feedwheel handle (#58) toward the sealing handle
(#73) with your right hand. While in this position, insert
the strap into the sealing section against the front strap stop
(#13) so the strap sits inside the side strap stop (#91 or #92).
The end of strap should protrude 1” beyond the front strap
stop (#13). Release the feedwheel handle (#58) so the strap is
locked and ready to be tightened.
5. Move the sealing handle (#73) back to its original posi-
tion. Hold the cut off strap end with the left hand. Lift the
feed wheel handle (#58) toward the sealing handle (#73) to
release the strap. Slide the tool away to the right.
STRAP MUST SIT INSIDE THE SIDE STRAP STOP
INSERT THE STRAP INTO THE SEALING SECTION AGAINST THE WALL OF HOUSING
3. Hold the sealing handle (#73) firmly with left hand.
Pump the tensioning handle (#82) with your right hand
until the desired tension is reached.
4. Place right hand firmly on the tensioning handle (#82) for
supporting the tool. Move the sealing handle (#73) all the way
forward until it hits the stop (#51). This seals and cuts the strap.