Klemsan Klea 320P-D, User Manual

Page: 28 / 126

28
4
Quadrant
Energy Analyzer
4
Quadrant
Energy Analyzer
At the top of the screen, there are multiple selection menus.
In the middle, instantaneous voltage and current values pertaining to each phase are shown.
At the bottom left of the screen, current and voltage values of the three phases and
connection type are shown.
At the bottom right corner, system clock (KLEA time) is shown.
Operator can navigate between the multiple selection menus by pressing right and left
arrow keys. Press OK key to enter into any multiple selection menu.
When 3phase-4wire or ARON connection is selected, VL-N voltages are shown in
startup screen.
When 3phase-3wire connection is selected, VL-L voltages are shown in startup screen
3.2.1 Settings
KLEA settings are made in this menu. Select Settings menu and press OK key. When OK
key is pressed, submenus will appear as seen in the Fig. 3-11 . Under the Settings menu,
the following submenus exist.
• Setup
• Date/Time
• System info
• Password
• Restart
• Default Settings
V1
V2
V3
V
V
V
A
A
A
I 1
I
2
I
3
1 7 : 2 2
0.0
0.0
220.0
5.0
5.0
5.0
V
1 2 3
I
1 2
1 2 E
Setup
Date / Time
System info
Password
Restart
Default settings
Settings
Measure Meters
Alarms Analysis
Fig. 3-11 Settings Menu
3.2.1.1 Setup Menu
The following submenus are available inside Setup menu:
SECTION 3 MENUS