33
07/2004
KR 806 - 2 / Serial No. 64004
CAUTION!
In care the drill mast with slide and drill head unit is slewed far to the
side, the point of gravity is in an inconvinient position. It is strictly
prohibited to activate the release switch of the oscillating automatic.
The following sketch showes the starting position in the lower section and the
according rig position in the upper section.
The stand areas (track chains) with relevant tipping edges as well as the with
“S” marked point of gravity are shown in the sketch.
There fore a sticker, showing the sketch, is located at drivers’s stand (platform)