GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
24
7.3.2
Tank Installation
Use hardware H1, H2, H3 & H4 to install the tank onto the battery tray bracket as shown below. Fully
tighten the hardware.
Figure 21- Tank Installation, 15 to 20 SUV's
7.3.3
Compressor Installation
1.
Use the hardware included in the compressor package to install the compressor onto the
battery tray bracket as shown below in
RED
. Fully tighten the hardware.
2.
If fitment issues are present during installation onto the vehicle, the
BLUE
alternate mounting
may be explored. If using this mounting option, one (1) set of the compressor mounting
hardware will not be used.
Figure 22- Compressor Installation, 15 to 20 SUV's
