GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
26
7.4
Air Tubing Installation
1.
Install the Air tubing included with your kit onto Item No. 7 (90° Compression Fitting). A heat
gun (or equivalent) may be used to soften the end of the tubing to facilitate the installation over
the barb of the fitting.
2.
Install the air tubing included with your compressor onto the barbed fitting on the compressor
intake.
3.
Tape/cover the exposed ends of the air tubing to prevent debris from entering during kit
installation / routing.
END OF SECTION
