CANX3-KIT
Installation and Operation Manual
PG 24/44
REV: A (9/4/2020)
8.5.
Air Tank Fittings - Bench Assembly
8.5.1.
Gather all necessary Air Fittings and Air Tank; ensure all threads on fittings and inside ports are clean.
8.5.2.
Apply two small drops of
8.5.3.
Attach Air Fittings to Air Tank, per below illustration and ensure they are oriented exactly as shown.
Click Here to View Fittings List
Figure 12
–
Air Tank Fittings installed on Air Tank, Exploded View
8.5.4.
Hand-tighten each fitting, then further tighten 1/4-1/2 turn using proper sized box-end wrench; adjust as
necessary to match fitting orientation shown in figure below.
8.5.5.
Connect a minimum of 6 FT. of suppl
ied 1/4” Air Tu
bing to front Air Fitting, as shown below. Connections
to all Kit components are also listed.
Figure 13
–
Air Tank Fittings Orientation (from above vehicle)
To Coupler
***
Connect
Air Tubing
NOW
To Air Horn
To Air Comp.
FRONT
F4
F5
F7
F7
F1
F3
F3
F2
F6
