CH
AP
DATE
WZB
10/24/201
9
DRAWING
DRAWING NO.
REV
BILL OF MATERIALS
9/24/19
SHEET:
DATE:
1
1 OF
1
ENGLISH
MAINTENANCE
• Regularly inspect ports and charging
cable for any debris, dirt, damage, and
corrosion.
• DO NOT attempt to repair device or
cable; replace as needed.
CLEANING
Be sure instrument is turned off and
disconnected from all power sources. Wipe
with a clean, dry lint-free cloth.
Do not use
abrasive cleaners or solvents.
RECHARGING
Recharge as needed. There are no pre-
designated intervals at which to recharge
as long as you are using the unit regularly.
Avoid discharging completely on a regular
basis, as this can impact overall life.
STORAGE
If storing for more than one month, charge
completely before storage, and recharge
approximately every three months to avoid
full discharge. Store in cool temperatures,
mild humidity, and away from direct
sunlight (See GENERAL SPECIFICATIONS
section).
Leaving in a vehicle or other confined
spaces in extreme hot temperatures can
lead to decrease in service life, overheating,
or fire. Extreme cold temperatures below
the specified storage range can also harm
performance and service life. Keep away
from corrosive chemicals and gases.
After taking out of storage, inspect visually
to make sure device and all accessories
look satisfactory. Allow unit to return to
ambient conditions before recharging.
DISPOSAL / RECYCLE
1390503 Rev. 04/20 A
Do not place equipment and its
accessories in the trash. Items
must be properly disposed
of in accordance with local
regulations. Please see
www.epa.gov/recycle
for
additional information.
www.
GlobalTestSupply
.com
Find Quality Products Online at: