KLEIBER KPE 660/5, Operation Manual, Page: 39 / 81

12 Command list
lx The maximum value memory is erased,
when the erasure time to external Write: xxlx (Ausgang 0 . . . 20 mA)
Response: „ok” when deleted, otherwise
„no”
lz Erase time of the maximum value memory
[s]:
0 = aus
1 = 0.01 2 = 0.05
3 = 0.25 4 = 1 5 = 5
6 = 25 7 = extern 8 = autom.
Command value: 1 digit
Read: xxlz
Response: 1 digit
Write: xxlz2 (erase time = 0.05 s)
Response: „ok” when accepted, otherwise
„no”
Limits: xxlz?
Response: 1 digit min. 1 digit max. („08”)
m1 Adjust sub-measuring range
Command value:
4 digit Hex TMB start
4 digit Hex TMB end Write: xxm1003200FA (TMB: -50
. . . 250 °C)
Response: „ok” when accepted, otherwise
„no”
Limits: xxm1?
Response: 4 digit min. 4 digit max., (corre-
sponds to measuring range)
Note:
The beginning and end must have a mini-
mum separation of 51 °C (dependent on the
adjusted measuring unit, see fh).
mb Inquiry measuring range Read: xxmb
Response: 4 digit start, 4 digit end in hex,
dependent of adjusted unit (see
fh)
me Inquiry sub-measuring range Read: xxme
Response: 4 digit start, 4 digit end in hex,
dependent of adjusted unit (see
fh) )
me Inquiry measured value Read: xxmsaaa
Response: 5 digit, 10 x measuring value
without decimal point (03456 =
345.6 °C)
first position „-” with negative values, aaa =
Number with multiple queries, corresponds
to aaa times xxms, dependent on adjusted
measuring unit (see fh)
na Inquiry device name Read: xxna
Response: KPE 660/5
pa Inquiry block parameter Read: xxpa
Response: 11 digit
2 digit emissivity in % (rounded)
1 digit response time
1 digit erase time
1 digit current output configuration
2 digit nternal temperature (always in °C)
2 digit device address
1 digit baud rate
1 digit keyboard lock
KPE 660/5 35