6
T H E L A Y O U T O F T H E C O N T R O L P A N E L
Cooking for a specific length of time
•
Select the cooking method.
Turn the cooking selection knob to the position you require
Example :
"CONVENTIONAL" position.
•
Select the cooking temperature.
Turn the thermostat knob (temperature selection) to the temperature recommended in your recipe.
Example: 200°C temperature mark.
•
Select the cooking time.
Press the "PROGRAMMING"
Button (5)
.
The cooking time (indicating 0.00) and the cooking time symbol flash to show that the time can be adjusted.
The cooking time may be adjusted to any time up to 23 hours and 59 minutes.
Press the
+
and
-
Buttons (6)
to adjust to the time you require.
Example: 30 minutes cooking time
The cooking time starts to count down as soon as the
+
and
-
Buttons (6)
are released.
The cooking time symbol stops flashing and the time on the clock is displayed again.
Cooking will then stop when the programmed cooking time is up.
You can:
- change the cooking time at any point by repeating the operations described above,
- check how much cooking time remains at any point by pressing the "PROGRAMMING"
Button (5)
- cancel the programming at any point by pressing the "PROGRAMMING"
Button (5)
for a few seconds
until you hear a bleep.
At the end of the cooking time,
- the oven stops,
- the cooking time symbol goes out,
- the cooking time display indicates 0.00,
- the oven beeps for a few minutes.
Stop the beeping by pressing any button; the display shows the time on the clock again.
WARNING : your oven then starts to heat up again.
To stop the oven heating up, turn the temperature and function selection knobs to the "off" position.
Nb :
Cooking using the programmer
