&DXVH
6ROXWLRQ
Light on, but motor
does not work.
The blades are blocked.
The capacitor is damaged.
Replace capacitor.
The motor is damaged.
Replace motor.
The internal wiring of motor is cut off /
disconnected. An unpleaseant smell
may be produced.
Replace motor.
Both light and motor
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect the wires as per the
electric diagram.
Oil leakage.
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and seal with
glue.
Leakage from the connection of
U-shaped section and cover.
Take U-shaped section down and
seal with soap or paint.
Vibration.
The blade, if damaged, can cause
vibrating.
Replace the blade.
The motor is not tightly fastened.
Fasten the motor tightly.
The
range
hood is not tightly fixed.
Fixed the
range
hood tightly.
Insufficient suction.
The
distance between the
range
hood and the cooktop is too large.
Readjust the distance.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors /
windows.
The machine inclines.
The fixing screws are not tight
enough.
Tighten the fixing screw and make
it horizontal.
The hanging screws are not tight
enough
Tighten the hanging screw and
make it horizontal.
do not work.
.
)DXOW
7URXEOH6KRRWLQJ
Check the blades.
If the appliance fails to operate correctly during the warranty period please visit our website to
request a warranty service (see back cover of this manual for details). When booking a service
please provide your Model No.: RHUC61 or RHUC91 and the individual Serial Number of your
appliance which is found on the rating plate, visible inside the rangehood when the grease filter is
removed. See instructions for removing the grease filter on page 11 of this manual. Ensure power
to the appliance is turned off before commencing.
