TROUBLE SHOOTING
Fault
Cause
Solution
Light on, but
motor does not
work
The capacitor is damaged.
Replace capacitor.
The motor is damaged.
Replace motor.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Replace motor.
Both light and
motor do not
work
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect the wires as per the electric
diagram.
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and
DSSO\VHDODQW
.
Leakage from the connection of
U-shaped section and cover.
Take U-shaped section down and seal
with soap or paint.
Vibration
The blade, if damaged, can cause
vibrating.
Replace the blade.
The motor is not tightly fastened.
Fasten the motor
ILUP
ly.
The
UDQJHKRRG
is not tightly fixed.
Fix the
UDQJHKRRG
ILUPO
y.
Insufficient
suction
The distance between the cooker
hood and the
FRRNWRS
is too large.
Readjust the distance.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors / windows.
The
DSSOLDQFH
inclines
The fixing screws are not tight
enough.
Tighten the fixing screw
ZKLOHPDNLQJLW
horizontal.
The hanging screws are not tight
enough
Tighten the hanging screw
ZKLOHPDNLQJ
LW
horizontal.
1