22
ELECTRICAL HOOK-UP
Before connecting to the electricity, make sure that:
- the characteristics of the electrical system satisfy what is shown on the serial number plate applied to the
front of the oven;
- the system has an effective earth connection compliant with current standards and laws.
The earth connection is required by law. The cable must not, at any point, reach a temperature greater than
50 °C above the ambient temperature.
This oven must be connected to the electricity through a power supply cable and plug that is compatible with
the outlet of the electrical system that powers this oven.
If a fixed appliance does not have a power cord and plug, or another device that ensures disconnection from
the mains, with an opening distance of the contacts that allows complete disconnection under the conditions
of excessive voltage category III, such disconnection devices must be provided in the power supply mains
conforming to the installation rules.
The omnipolar socket or switch must be easy to reach when the appliance is installed.
Note: The manufacturer declines all liability if the usual accident prevention standards and the above
instructions are not followed.
TYPE AND MINIMUM DIAMETER OF THE
CABLES
SASO
H05RR-F 3x1.5 mm H05RR-F 3x2.5 mm
H05VV-F 3x1.5 mm H05VV-F 3x2.5 mm
H05RN-F 3X1.5 mm H05RN-F 3X2.5 mm
H05V2V2-F 3x1.5
mm
H05V2V2-F 3x2.5
mm
NEW OMFE6010 60CM OL FA.indd 22
NEW OMFE6010 60CM OL FA.indd 22
22/08/11 12:48 PM
22/08/11 12:48 PM