TECHNICAL
FEATURES
MICROWAVE OVEN
MWK200X
MWK200X1
P33CKL10I
8X0100
11/2006
TF 1/1
AFTER SALES SERVICE DATA
•
Operating instructions
: -
•
Servicing guide
: -
OVERALL DESCRIPTION
•
Date of manufacture
: 12/2006
•
Type
: Electronic
•
Cavity
: Inox
•
Colour
: Inox
CHARACTERISTICS
•
Power supply
: 230-240 V / 50 Hz
•
Current density
: 16 A
•
Maximum consumption
: 3100 Wh
•
Grill power
: 1550 W
•
Hot air power
: 1600W -
•
Microwave maximum power returned (CEI) : 900 W
•
Weight bare
: 36 kg
•
Volume
: 30 l
•
Lamp
: 25 W
DIMENSIONS
Overall
Inside
Building-in
Height
460 mm
254 mm
450 mm
Width
592 mm
350 mm
600 mm
Depth
507 mm
351,4 mm
550 mm
SAFETY
3. The primary and secondary microswitches control the
door closing and stop wave emission if the door is
opened.
4. If the primary safety microswitch fails, the control
locking contact produces a short-circuit and the fuse
melts :
•
MAGNETRON : cut off in case of overheating at
130°C.
•
OVEN : protected by a 12 A fuse.
•
GRILL : cut off in case of overheating at 100°C.
WARNING !
MICROWAVE RADIATION.
DO NOT EXPOSE YOURSELF TO THE MICROWAVE
GENERATOR RADIATION OR OTHER PARTS UNDER
MICROWAVE ENERGY.
Measuring microwave leaks is a must before and after any
service on the microwave oven.
It is absolutely forbidden to cancel the securities fitted to the
door.
All inlet and outlet microwave connections, wave guides,
flanges and gaskets must be safe.
Never use the appliance without a load absorbing the
microwaves (water).
Never look into a wave guide or open antenna while the
appliance is working.
DANGER HIGH VOLTAGE
In the high voltage area, there is a voltage higher than 4000
volts.
The hood must not be removed when the supply cord is
connected to the wall socket.
The oven must not be operated if the hood is removed.
Wait at least 30 seconds after disconnecting the oven, then
short-circuit the terminals using pliers with insulated handles
before disconnecting the H.V. capacitor.
WARNING !
When servicing with the need to cut off the trap (under the
motor plate), please replace this trap using the ref. 76X7754
screws.
