Kleenmaid lwg74, Installation Manual

Page: 12 / 22

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
38910 10
High Standpipe Installation
Place the adapter into the standpipe. Remove the
beaded tie-down strap from accessories bag and place
around standpipe and drain hose, approximately 30 cm
(12 inches) down from the top of pipe and tighten strap
to hold hose to standpipe. This will prevent the drain
hose from dislodging from drain receptacle during use.
Figure 7
Low Standpipe Installation
No. 562P3 Siphon Break Kit is required for this type
of installation. This kit is available (as optional
equipment at extra cost) through an authorized dealer
or parts distributor. Installation instructions are
supplied with the kit.
Figure 8
TLW1962N
1 Standpipe Adapter
2 Drain Hose
3 Tie-Down Strap
4 Standpipe (Standpipes higher than 122 cm
[4 ft.] are not recommended)
TLW1962N
2
3
4
1
W5128
1 562P3 Siphon Break Kit
2 Drain Hose
3 Standpipe
W512I
1
2
3