7
If the floor is uneven, use the
adjustable feet to level the machine.
•
Undo the locking nuts (fig. 1).
•
Rotate the feet to level the machine
(fig. 2).
•
Tighten the locking nuts (fig. 3).
Maximum height of the washing
machine is 850 mm.
IMPORTANT!
The machine must be steady and level
on the legs, and
must not rock.
The
floor on which the machine stands
should be firm and dry, otherwise the
machine may slide during the spinning
cycle.
Connection to the Water
Supply
The elbow connection of the inlet hose
is fixed to the coupling on the rear of
the washing machine.
Insert a strainer (mesh) washer into the
nut at the other end of the hose and fix
the hose to a tap. To ensure efficient
operation, the water pressure of the
water supply should be
(min. 7 and
max. 115)
psi.
If the pressure exceeds the maximum
limit allowed, fit a pressure regulator
(available at plumbing supply outlets).
Open the tap fully - in 15 seconds, 3
litres of water should pour out; this is
the
minimum
pressure of the water
supply.
Connection to hot/cold
Washing machines designed for the
connection to hot/cold water are
equipped with two inlet hoses.
3. Placing and Installation
Hot Tap
Red Nut
Summary of Contents for KFL806
Page 12: ...14 2 5 2 5 KFL 806...
