Kleenmaid KCGCT6010, Instructions For Use And Warranty Details

Page: 10 / 28

8
VENTILATION
Ventilation must be in accordance with local installation code. The appliance
must be install in a well-ventilated environment to guarantee a correct
combustion gases exchange, proper air circulation and working temperature
within safety limits.
MODEL NUMBER PLATE
The Model Number Plate is
ILWWHGWR
the under
VLGHRIWKH
case. A second Model
Number Plate is applied
W
o the front page of the instruction booklet.
CONNECTING THE COOKTOP
ELECTRICAL SUPPLY
The appliance, when installed, must be electrically grounded in accordance
with local codes
IMPORTANT:
The appliance must only be installed by an authorised person
and specialised electrician,
ELECTRICAL INSTALLATION AND CONNECTION
This appliance is equipped with a three wire flexible cord,
DQG
a suitable plug
is to be used. This plug must be plugged directly into a properly grounded
single-phase 220 – 230 – 240 V ~ 50/60 Hz 15 amps electrical outlet. Also,
position the plug in a location accessible after appliance installation, unless
the appliance incorporates or is connected to a switch that ensures all-pole
disconnection. This type of switch must have a contact separation in all poles
of not less than 3 mm. The same type of switch or connection device must be
used when the appliance is to be directly connected to main power supply.
The
HOHFWULFDO
cord connected to the cooktop
LV
flexible. Pass it
through
D
hole prepare
G
in
WKH
countertop to plug it
LQ
to
D
wall socket.
To facilitate service, the flex
LEOH
cable must not be shortened and should be
accessible and routed to permit temporary removal of the cooktop.
The instructions for hobs shall state that the appliance is not intended to be
operated by means of external timer or separated remote-control system (IEC
60335-2-6:2002+A2:2008) (Fig. 03/A).