Kleenmaid KCDV60, Instructions For Use And Warranty Details

Page: 6 / 16

Top board
Control panel
Door
Front vent flange
Side panel
Filter
Power plug
Switch
Tumble Door
7 8
• Dryer should be placed in a ventilated area with
not less than 10cm distance from the wall. It is suggested
there are no obstacles within 1.5m in front of dryer
to
•
Level Installation:
Use a spirit level or similar method to ensure that after installation the top
of the dryer is level from side to side and from front to back. To make
adjustments pack solid, non-combustible material under the relevant
corner of the dryer, ensuring that it is stable. This will only be required if
the floor upon which the dryer is installed is not level.
I f
dryer
is
not placed horizontally (the lean angle is no more than 2
° )
, the
dryer
may become
unbalanced or stop working.
Notice when installing:
• Do not install the dryer in the open air or
a
place
where it may be
damaged by rain
.
• Do not place the back of dryer near curtain
s
or
anything that may
blow
in the wind
.
• Do not place the dryer near gas or
other flammable substances.
•
When installing the clothes dryer by attaching to a wall please
follow the directions in the Wall Hanging Installation
Instructions document in the Accessory Kit.
>10cm
Note!
INSTALLATION INSTALLATION
Product Description
Installation
Front panel
ensure adequate
ventilat
ion
.