positioning
Ŷ7KLVDSSOLDQFHLVWREHEXLOWLQWRDNLWFKHQXQLWRU
PPZRUNWRSSURYLGLQJWKH
IROORZLQJPLQLPXPGLVWDQFHVDUHDOORZHG
600
o
The edges of the hob must be a minimum distance of mm from a side or
rear wall.
o
o
400 mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400 mm, then it must be
at least
50 mm
away from the outer edges of the hob.
o
50 mm clearance around the appliance and between the hob surface and any
combustible materials.
45 mm
60
o
You must have a gap of at least 25 mm and at most 74 mm between the
underneath of the appliance and any surface that is below it.
The safety gap between the hob and the rangehood placed above must comply
with the recommendations of the rangehood manufacturer. In case of no
instructions, a minimum distance of 650mm (or other minimum distance as
may be specified by AS/NZS 5601 and interpreted by a certified installer) should
apply.
FO 0813
400mm
480mm
400mm
0
in.
0mm
&/($5$1&(65(48,5('
:+(1),77,1*7+(+2%
:,7+$&22.(5+22'$%29(
60mm
M
2
560mm
600mm
650mm
16
-
An oven must have forced ventilation to install a hob above it.
-
Check the dimensions of the oven in the
user
manual.
-
The cut out size
must comply with the specified dimensions.
