1
2
Wash(45
℃
)
Rinse(55
℃
)
Rinse(55
℃
)
30
0.7
12.5
20g
Program
Running
Time(min)
Energy
(Kwh)
Water
(L)
Description
Of Cycle
Rinse
Aid
Detergent
Pre/Main
Prewash
15
0.02
4.5
Rapid
Soak
the
comparability test
are
i
n accordance with
*AS/NZS 2007.1
.
NOTE
:
AS/NZS 2007.1:
This program is the test cycle. The
parameters
for
Starting A Wash
Cycle
1.
Draw out the lower and upper basket, load the dishes and push them back.
It is
re
commended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket.
For
power supply
information
refer to ”Product
data
”
on the last page
.
Make sure that the water supply is turned on to full
pressure.
4.
Open the door,
p
ress the Power button.
5.
Choose a program
then
the response light will turn on.
When the door is
close
d
the
dishwasher will start its cycle.
Changing The Program Mid-cycle
A wash cycle
should
only be changed if it has been running for a short time
,
otherwise the detergent may have already been released
and
the dishwasher may
have already drained the wash water. If this is the case, the dishwasher needs to be
reset and the detergent dispenser must be refilled. To reset the dishwasher, follow
the instructions below:
