User instructions
12
3.2
Washing programs
The dishwasher is equipped with a control panel and an
3-FIGURE
DISPLAY (12)
, described in chapter "3. Description of the controls", from
which it is possible to carry out all the power switch-on, switch-off and
programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
EXTRA PROGRAMS
Button
gives access to
five extra programs
in addition to the ones
which can be selected directly using the program selector button.
This button must be pressed (the light comes on)
after
selection of the
“main” program (1,2,3,4 or 5).
This function
is retained in the memory
, so the button has to be pressed
again (the light goes out) if the user wishes to execute one of the 5 main
programs at the next cycle.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with
closed door
.
With open door, the
3-FIGURE
DISPLAY (12)
will appear the symbols
--
.
SELECTION PROGRAM
Keep pressing the
PROGRAM SELECTION
button
(2)
until the indicator
light corresponding
(3)
to the desired program illuminates.
