17
9/ SETTING THE PARAMETERS
AUTOCLEAN
Set
AUTO
Quick
Opti
60
> Setting the time
To do this, hold down the “Set” button. When the
time flashes, turn the selector to the desired time.
> Setting the water softener
Set to the level corresponding to the hardness of
your water:
C0
to
C5
.
> Product use
You can cancel display of the relevant lights,
depending on the products being used:
- Salt
Set to
OFF
if you are not using salt or
if you are using multi-purpose tablets.
- Rinsing product
Set to
OFF
if you are not
using rinsing product or if you are using multi-
purpose tablets.
> Multi-purpose tablets: only for
c0
or
c1
activate the “4-in-1” option
- For optimum product performance (depending
on the water softener setting table on page 11),
set:
-
(Dry+)
to select “4-in-1” with
“Extra Dry”
-
(Sparkle)
to select “4-in-1” with
“Sparkling Clean”
.
> Beep at the end of the programme
On
to activate the function;
OFF
if you do not wish
not to hear the beep at the end of the program.
> Screen brightness
Set the screen brightness to suit yourself from
L1
minimum to
L5
maximum.
Display
SET Brightness <>
L2
SET Time <>
8:12
SET Hardness <>
c2
USE Salt <>
OFF
USE Rinse aid <>
OFF
USE 4 in 1
<>
On
USE 4 in 1 (Dry+)<>
On
USE 4 in 1 (Sparkle)<>
On
USE Buzzer Sound <>
On
• SETTINGS POSSIBLE USING THE “SET” BUTTON AND THE
PROGRAMME SELECTOR:
Advice:
The setting is confirmed automatically when you move on to the next parameter or if the
“Set” button is not pressed again within the next 10 seconds.
1 long
press
•
The parameters are set with the door closed.
•
1 long press on the “Set” button and then a short
press enables you to move on to the following para-
meters.
Set the parameters by turning the programme selec-
tor in one direction or the other.
1 short
press on
the “Set”
button and
then turn
the
programme
selector