Press LED light on the front of front plate, install the LED light on the front plate.
Connect the terminal of LED light and light leads.
Carefully fasten the 2 screws on the front plate ,reinstall the grease filter.
12
Round lamp
LIGHTING
The light bulbs cannot be replaced. The entire light module has to be replaced.
When changing the light modules, the contacts are live.
Before changing the light module(s), unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
Remove the grease filter and carefully remove the 2 screws from the front plate (a
Philips head screwdriver will be needed to remove the screws).
Disconnect the terminal of LED light.
Press LED light on the back of the front plate, take the LED light out.
Replace the lamp(commercially available LED lamp (max.1.5w).
LIGHT REPLACEMENT
(
&RPSOHWHGE\SURIHVVLRQDOV
)
Replacing the light modules
Max Power Voltage
Picture
Lamp Cap ILCOS D code
Round/ Diameter
: 70mm
1.5W
DC 12 V
——
DSR-1.5-S-70
