Kleenmaid CH805CE-1, Instructions For Use Manual

Page: 10 / 24

172736
Power setting Maximum power time
(in seconds)
1 82
2 164
3 246
4 328
5 410
6 82
7 164
8 164
• Switch the relevant hotplate ( 2 or 4) and consequently
switch the extended hotplate ring by pressing the relevant
sensor (see the control element board illustration). The LED
signal lamp above the indicator displays the extended ring is
on. Now select the random heating power for both hotplate
rings together. Extended ring may be switched off either by
consequent pressing the sensor or by reducing the heating
power to
“0” , as well as by simultaneous pressing of both the
(-) and (+) sensor. It may of course be switched off also by
switching off the entire hob.
Switching the second hotplate ring on
• The rear right hotplate (4) is equipped with the extended
hotplate ring, which is switched on by pressing the special
second ring sensor. The signal lamp above the indicator
displays the ring is on.
Switching the third hotplate ring on
(certain models)
• The front left hotplate
(2) is equipped with two extended
hotplate rings. To switch the second ring on, press the special
second ring sensor (top left). The LED signal lamp above the
indicator displays the ring is on. To switch on the third ring
press the same sensor once again, another LED signal lamp is
on. Both extended rings are switched off by repeated pressing
the sensor. They may also be switched off by switching off the
relevant hotplate or the entire hob.
10
Switching the extended
hotplate rings on
(hotplates 2 and 4)
172731_en.indd 10 172731_en.indd 10 9.1.2007 14:52:02 9.1.2007 14:52:02