OPERATING
Selecting power.
-
/
+
Each hotplate has
-
/
+
. power sensors. Touching these allows the power to
be adjusted in the range
1
to
9
.
To alter the power while the hotplate is on, touch
-
/
+
sensors to obtain the
required power level.
Switching off a hotplate.
-
Touch the hotplate’s
-
sensor until it shows
0
. If the hotplate is hot,
H
will
light up.
¡Warning!
If a power cut occurs while the residual heat display is on, remember that
when power is restored the display will not reappear even though the
hotplate is still hot.
Residual heat display
H
.
When activated but with level
0
,
the corresponding displays shows
0
and
H
.
alternatively.
While a hotplate is still hot but switched off, the display will show
H
.
Depending on the power that was used, this display may remain on for up to
approximately 30 minutes.
Do not touch the area of the hotplate. THERE IS A RISK OF BURNING.
6