ENGLISH
5
the spring-loaded button snaps securely in place. The adjustable T-bar handlebar
can be adapted in height to suit the rider.
Three different positions are available. Lock the clamp tight and securely when you
have finished adjusting the height.
3 Positions for ONE K180 PISTON DELUXE:
• Low position: 89.5cm
• Middle position: 94.5cm
• High position: 99.5cm
3 Positions for ONE K200 PISTON DELUXE:
• Low position: 93cm
• Middle position: 98cm
• High position: 103cm
3 - Folding the scooter
Put both hands on the handlebars, giving a slight kick on the pedal lock (diagram
B). Thanks to the piston-assisted folding system, when you kick the mechanism on
the bottom of the pole to fold the scooter, the back wheel will automatically lift up, to
put the scooter in trolley mode (see diagram C).
DO NOT FORGET TO REGULARLY TIGHTEN THE DIRECTION BLOCKS TO
AVOID MISALIGNMENT OR LOSS OF THE SCREW.
Care / Maintenance: regular maintenance is a safety commitment;
-
Wheel bearings
: avoid going through water, oil or sand as this can damage
wheel bearings. To look after the wheel bearings, systematically check that the
wheels turn properly by turning the scooter upside-down and using your hand
to spin the wheels. If the wheels do not spin they must be removed to check
their condition. First unscrew the wheel axle, remove the axle and detach the
wheel, then carefully push the two wheel bearings out of their housing. If they are
chipped or dented, new ones should be bought. If there is no visible damage,
they must then be oiled. To do this, remove all traces of grease, mud or dust with
a kitchen towel or cloth, and re-oil them with a grease spray or by leaving them to
soak overnight in oil [turn them several times in the oil first]. Then reassemble the
wheel bearings and axles, followed by the wheel, onto the scooter. Proceed in the
same manner for the other wheel.
-
Wheels
: the wheels wear down with time if overly used on rough surfaces. In the
interest of safety, they should be checked regularly and replaced if necessary.
-
Modifications
: the original product must by no means be modified except for the
maintenance-related changes mentioned in these instructions.
-
Nuts, axles and other self-locking fixings
: these should also be checked
regularly. They can become loose after a while in which case they should be
tightened. They can become worn and not tighten properly, in which case they
should be replaced.
Additional Info
For questions and inquiries please contact us at: [email protected]
WARRANTY
The manufacturer warranties this product to be free of manufacturing defects for
period of 2 years from date of purchase. This limited Warranty does not cover normal
wear and tear, tire, tube or cables, or any damage, failure or loss caused by improper
assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation or transportation;
• modified in any way;
• rented
The manufacturer is not liable for incidental or consequential loss or damage due
directly or indirectly to the use of this product.
Globber does not offer an extended warranty. If you have purchased an extended
warranty, it must be honoured by the store at which it was purchased.
For your records, save your original sales receipt with this manual and write the
product name below.
………………………………………………………………………..
Spare parts
To order spare parts for this product, please visit our website www.globber.com
