Bright/normal
Spring reverb
XLR out DI out for record
15/7.5w sw
FS jack
FX loop
108 w power transform
Precision made parts used for lowest signal to noise ratio.
5W metal oxide power resistors. 600V polypropylene film/foil and polyester military capacitors
1.
LED NORMAL/BRIGHT (1)
Green is normal, Red is bright
2. NORMAL/BRIGHT
:
(2)
Switch to position “I” to activate; ”O” to OFF
3. PASSIVE INPUT
:
(3)
The Input jack will accept signals from passive guitar pickups, Be sure to use a high-quality shielded cable to connect the guitar to the
amplifier
4. ACTIVE INPUT
:
(4)
The Input jack will accept signals from active guitar pickups, Be sure to use a high-quality shielded cable to connect the guitar to the
amplifier
5. GAIN
:
(5)
Preamp gain control