Normal operation - full power at 18 watts
Power reduction to 4 watts
Power reduction to 1 watt
Speaker off
19. SMPT
SELF MONITOR PAIR TUBE.
When amp is on without guitar connected, if SMPT LED lighted, it mentioned you that power tubes did not
matched. It is better to replace them.
20. FOOT SWITCH (20) (EXRERNAL)
Provided connection of the optional remote footswitch. Footswitch is used to select the lead or Normal channels and defeat reverb.
When using remote foot switch, always insert the plug fully (second click) to ensure proper operation.
21. OUTPUT
:
(21)
Provide for connection of external 4ohm speaker cabinet.
22. OUTPUT
:
(22)
Provide for connection of external 8ohm speaker cabinet.
23. OUTPUT
:
(23)
Provide for connection of external 16ohm speaker cabinet.
NOTE: The way connect with speaker
(1)
Connect three speakers at same time, The impedance of each speaker must 12ohms
(2)
Connect with two speakers in the meantime, If you use INPUT 21 and 22 (4ohms and 8 ohms), The impedance of each speakers
is 4 ohms. If you use INPUT 22 and 23 (8 ohms and 16ohms),The impedance of each speakers is 8ohms
(3)
If you only connect one speaker, please connect according to the impedance.
24. DI
:
(24)
XRL DI out for recording.
T
he RED BOX has for years set the industry standard for analog guitar DI boxes with built-in speaker
emulation. It converts the PGA 18H’s speaker out signal, which is tapped post power amp and pre POWER SOAK, into a balanced,
frequency-compensated signal that you can patch directly to a mixing or recording gears. This signal it sounds very authentic, much
like that of a guitar amp, when rendered by a PA or studio monitors. The channels’ MASTER settings directly affect the signal level,
but the selected POWER SOAK mode does not.
Summary of Contents for PGA18H(M)
Page 7: ......