2. Change initial password(admin password)
(In factory state, the initial password is the admin password)
Touch the keypad to light on
Enter O and press
Enter initial password(090723a) nd press g, you will hear voice prompt for
menu list: I programming 2 deleting 3.change password 4 voice
regulating 5.duaI verification 6.set time 7.check record 8.RF dcvicc
Press '3' , then enter initial password and press #
Enter new admin password and press ti
Enter new admin password again and press N, Done
3. Programming
Touch the keypad to light on
Enter 0 and press
Enter admin password and press you will hear voice prompt for menu list:
l.programming 2.delenng 3 -change password 4,voice regulating
5.duaI verification 6,set time 7.check record 8.RF device
Press '1' and you will hear 'The serial number Please input the password,
card or fingerprint' (The serial number is given in order automatically)
A. Program password
I.enter a password and press # 2,enter the password again and press
B. Program card: swipe a card on keypad area. Done
C. Program fingerprint: read fingerprint 2 times. Done
Note: Press 'O' for continuous programming, press other buttons to
exit.
4. Deleting
Touch the keypad to light on
Enter O and press
Enter admin password and press it, you will hear voice prompt for menu list:
l.programming 2,deleting 3.change password 4.voice regulating
5.dual verification 6.set time 7.check record 8,RF device
Press '2' and you will hear voice prompt as following: l.delete by serial
number 2.clear cards 3 clear passwords 4,clear fingerprints 5. Delete
all
A, Pross '1' to delete by 'oerialn umber(ontort he serial number in 2 digits)
B, Pross '2' to clear all cards
C, Press 'J' to clear all passwords
D. Press '4' to clear all fingerprints
E, Press
to delete all of them
2 –
User Manual for D808(F)
