Terminal Connections (F)
STROBE
Applying a negative voltage triggers the strobe.
TRIG -
Applying a negative voltage triggers the sounder.
The permanent 12V DC supply from the panel is connected to these terminals.
If the hold-off supply is removed from these terminals, the unit will self activate on
SUPPLY -
battery backup (Note: The LED will stop flashing on battery backup.)
TAMPER R
Sounder tamper loop negative return.
TAMPER S
This terminal is only used when connecting two units in series.
(Note: remove series tamper jumper when using tamper S input)
Typical Wiring Configurations
5 wire connection (with NiMH battery)
5 wire connections for 2 units in series (with NiMH battery)
3
4
1
2
3
4
5
6
Panel
Sounder
0V Strobe
0V Sounder Trigger
+12V Hold off supply
0V Hold off supply
Tamper return
STROBE
TRIG -
SUPPLY -
TAMPER R
TAMPER S
1
2
3
4
5
6
0V Strobe
0V Sounder Trigger
+12V Hold off supply
0V Hold off supply
Tamper return
Remove Series Tamper jumper
(G) on PCB
Leave
Series Tamper jumper
(G) on PCB
STROBE
TRIG -
SUPPLY -
TAMPER R
TAMPER S
1
2
3
4
5
6
1
2
3
4
5
6
Panel
Sounder
Sounder
}
